Niron All Pro
NIRON PREINSULATED piping system
It is the innovative preinsulated PP-RCT pipe and fitting system that is ideally suitable for applications in areas where the heat loss reduction is essential.
This product range was specifically designed for networks for the distribution or adduction of hot fluids.
The reliability, ease of installation and relevant physical-mechanical properties of the materials used allow installers to avoid many problems when installing heat distribution and conditioning systems.
- LIBRARIES
- datasheet
- Documents
- CASE HISTORY
- Main features
SUBMITTALS

SUBMITTALS
BFX2 Hybrid Prein. Pipe Carrier Pipe End and BFX End SDR 11_AllPro.pdf
BFX2 Hybrid Prein. Pipe Carrier Pipe End and BFX End SDR 17_AllPro.pdf
BFX2 Sim. Butt Weld Pipe SDR 7.3_AllPro.pdf
BFX2 Sim. Butt Weld Pipe SDR 11_AllPro.pdf
BFX2 Sim. Butt Weld Pipe SDR 17_AllPro.pdf
SDR 7.3_AllPro.pdf
SDR 11_AllPro.pdf
SDR 17_AllPro.pdf
AllPro Electrofusion Fittings.pdf
AllPro Preinsulated BFX2 Fittings SDR 7.3.pdf
AllPro Preinsulated BFX2 Fittings SDR 17.pdf
AllPro Preinsulated BFX2 Fittings SDR 11.pdf
AllPro Preinsulated Standard & Extended Fittings SDR 17.pdf
AllPro Preinsulated Standard & Extended Fittings SDR 7.3.pdf
Electrofusion Prein. Coupling SDR 7.3_AllPro.pdf
Electrofusion Prein. Coupling SDR 11_AllPro.pdf
AllPro Preinsulated Standard & Extended Fittings SDR 11.pdf
APPLICATIONS
- District heating / Cooling
- Transport of Chilled Water / Condensor Water
- Secondary Cooling / Glycol Cooling
- Industrial Cooling
- Transport of Hot Water for Hydronic Heating
- Hot and Cold Potable Water
BENEFITS
- Ease of installation and reduced installation time
- Excellent thermal insulation
- Low specific weight
- Low pressure drop
- Excellent weldability thanks to the fittings of the NIRON range
- High resistance to corrosion
- High durability
- Reliable junction
- Resistance to abrasion
- Resistance to stray currents
- Low cost of external support due to rigid outer jacket and IPS size
- High integrity of insulation layer is maintained due to rigid jacket, even in direct buried applications
The possibility of burying pipes directly eliminates high masonry costs. In tunnels or manholes the full tightness ensures durability. Moreover, ease of installation allows substantial time savings.
NIRON ALL-PRO PREINSULATED SYSTEM is properly installed when complete with all its components (pipe, fittings and joint sealing kits).
THERMAL INSULATION (PUF)
The insulation of the primary pipe is made with a rigid polyurethane foam (PUF) according to EN 253 standard and is free from Freon. The coefficient of thermal conductivity is 0.14 BTU-inch/hr-ft2-oF at a medium temperature of 122°F (50°C).
This excellent characteristic of the material allows to obtain high levels of thermal insulation with significantly reduced insulation layers if compared to those that would be required if other materials were to be used.
In addition, due to its closed cell structure, under normal conditions of use it does not have any transformation caused by water absorption, compression, sacking, etc.
JACKET PIPE (pp-r)
The layer of polyurethane insulation is protected by a jacket pipe made of white Polypropylene (PP-R) white UV resistant in compliance with ASTM F1412-09.
- NIRON
Potable Water and HVAC Applications - Flextite Compressed Air Systems
- ELOFIT Gas & Water Installations
- SMARTFLEX
GASOLINE STATIONS - Tools
Nero by Niron | Polypropylene Pipes and Fittings with UV Protection
Niron All Pro | Innovative Preinsulated PP-RCT Pipe and Fitting
ELOFIT | HDPE Electrofusion Fittings and Special Components for Water and Gas under Pressure
ELOPRESS | Complete range of Compression Fittings for the Distribution of Drinking Water and Alimentary Fluids
SMART CONDUIT | Non-hydroscopic composite piping system designed to contain electrical and communication cables in hazardous environments
Oiltech | Non-hydroscopic composite piping system designed to contain electrical and communication cables in hazardous environments
SALES NETWORK
Agency in this area