Niron Clima Cool Pro
Piping System for UV Application
Niron Clima Cool Pro is produced using PPR material with an outer layer of POLYPROPYLENE duly UV stabilized with a dedicated masterbatch.
Characteristics
Niron Clima Cool Pro pipe is produced in full PP layer or in composite material with addition of fiberglass.
As the stress-bearing layer is made with PP-R, it has the high, well known and standardized performances of this class of polypropylene (Type 3).
- LIBRARIES
- DATASHEET
- Documents
- CASE HISTORY
The mechanical and physical properties fully comply with EN ISO 15874 Standard.
The pipe is compliant to the main Standards for the conveyance of potable water.It can be produced in different SDRs (from SDR 11 to SDR 17). The selection of the proper SDR and design is related to the required operating conditions.
The pipe has been designed with the highest safety standards. The UV barrier layer is in fact in addition to the SDR stress-bearing layer of the pipe.
The Nominal Diameter is maintained to facilitate the welding operations.
NIRON Clima Cool-pro piping range goes from ø 1" to ø16”. Bigger sizes can be provided upon request.
- NIRON
Potable Water and HVAC Applications - Flextite Compressed Air Systems
- ELOFIT Gas & Water Installations
- SMARTFLEX
GASOLINE STATIONS - Tools
Nero by Niron | Polypropylene Pipes and Fittings with UV Protection
Niron All Pro | Innovative Preinsulated PP-RCT Pipe and Fitting
ELOFIT | HDPE Electrofusion Fittings and Special Components for Water and Gas under Pressure
ELOPRESS | Complete range of Compression Fittings for the Distribution of Drinking Water and Alimentary Fluids
SMART CONDUIT | Non-hydroscopic composite piping system designed to contain electrical and communication cables in hazardous environments
Oiltech | Non-hydroscopic composite piping system designed to contain electrical and communication cables in hazardous environments
SALES NETWORK
Agency in this area