FITTINGS

Socket Fusion Fittings

• Injection molded as a unitary part from β-PP-RCT Material
• Standardly available in 1/2” through 4”
• Each socket fusion fitting can be welded to pipe of all SDRs

• Niron socket dimensions conform to ASTM F2389 socket dimensions

CLICK HERE FOR A GENERAL SUBMITTAL FORM

Product Name

SDR

Product Code

Photo

Size Range

Download

CROSS OVER PIPE PLAIN END

---

27NSOR

½” - 1”

Submittal Form

Cut Sheet

COMPACT CROSS OVER F/F SOCKET FUSION

---

27NSOFF

½” - ¾”

Submittal Form

Cut Sheet

COMPACT CROSS OVER F/M SOCKET FUSION

---

27NSOFM

½” - ¾”

Submittal Form

Cut Sheet

LONG RADIUS 90° ELBOW

---

27NCLR

½” - ¾”

Submittal Form

Cut Sheet

90° ELBOW

---

27NG

½” - 4”

Submittal Form

Cut Sheet

FEMALE THREADED 90° ELBOW W/NPT LEAD FREE BRASSW/NPT LEAD FREE BRASS

---

27NGF_NPT

½”x ½” NPT - 2”x2” NPT

Submittal Form

Cut Sheet

FEMALE THREADED WINGED 90° ELBOW W/NPT LEAD FREE BRASS

---

27NGTF_NPT

½”x ½” NPT

Submittal Form

Cut Sheet

FEMALE THREADED BACK PLATE 90° W/NPT LEAD FREE BRASS

---

27NTER_NPT

½”x ½” NPT

Submittal Form

Cut Sheet

MALE THREADED WINGED 90° ELBOW W/NPT LEAD FREE BRASS

---

27NGTM_NPT

½”x ½” NPT

Submittal Form

Cut Sheet

TEMPLATE FOR BATHTUB SET

---

00DIMA

---

Submittal Form

Cut Sheet

MOUNTING UNIT WITH 90° ELBOW

---

27NGVRF_NPT

½”x ½” NPT

Submittal Form

Cut Sheet

FEMALE THREADED STREET 90° ELBOW W/NPT LEAD FREE BRASS

---

27NGMFF_NPT

½”x ½” NPT

Submittal Form

Cut Sheet

For a complete listing of products and sizes please refer to the product catalog. We reserve the right to vary dimensions without notice, as the design of fittings change from time to time.

Butt Fusion Fittings

MOLDED BUTT FUSION FITTINGS

• Injection molded as a unitary part in β-PP-RCT material
• Available in sizes 2” through 20”
• Available in many fitting types with long spigots up to 12”
• Injection molded with short spigots 14” through 20”
• Butt Fusion fittings are made in each Pipe SDR

FABRICATED BUTT FUSION FITTINGS

• Fabricated from Niron β-PP-RCT Pipe to match the required SDR
• Standardly available in 14” through 24”; Smaller sizes also available
• 90’s are available in long radius (1.5D) as well as extra-long radius patterns
• All fabricated fittings are manufactured using heat fusion techniques to match the pressure rating of the pipe

CLICK HERE FOR A GENERAL SUBMITTAL FORM

Product Name

SDR

Product Code

Photo

Size Range

Download

90° ELBOW - MOLDED LONG SPIGOT

7.4

27NG9073_MM

2” - 8”

Submittal Form

Cut Sheet

90° ELBOW THREE PIECE LONG RADIUS (1.5D)

7.4

27NG9073_MMB3

6” - 12”

Submittal Form

Cut Sheet

90° ELBOW FOUR PIECE SEGMENTED FITTING

7.4

27NG9073_MMB

2” - 12”

Submittal Form

Cut Sheet

90° ELBOW MOLDED LONG SPIGOT

27NG909_MM

2” - 8”

Submittal Form

Cut Sheet

90° ELBOW THREE PIECE LONG RADIUS (1.5D)

27NG909_MMB3

6” - 14”

Submittal Form

Cut Sheet

90° ELBOW FOUR PIECE SEGMENTED FITTING

27NG909_MMB

2” - 14”

Submittal Form

Cut Sheet

90° ELBOW MOLDED LONG SPIGOT

27NG9011_MM

2” - 12”

Submittal Form

Cut Sheet

90° ELBOW THREE PIECE LONG RADIUS (1.5D)

27NG9011_MMB3

6” - 20”

Submittal Form

Cut Sheet

90° ELBOW FOUR PIECE SEGMENTED FITTING

27NG9011_MMB

10” - 20”

Submittal Form

Cut Sheet

ELONGATED 90° ELBOW

27NG9011_MMC

14” - 20”

Submittal Form

Cut Sheet

90° LONG RADIUS ELBOW
SHORT SPIGOT

27NGLR9011_S

4” - 10”

Submittal Form

Cut Sheet

90° ELBOW MOLDED LONG SPIGOT

27NG9017_MM

2” - 12”

Submittal Form

Cut Sheet

For a complete listing of products and sizes please refer to the product catalog. We reserve the right to vary dimensions without notice, as the design of fittings change from time to time.

Instabranch Fittings

• Injection Molded from β-PP-RCT material
• Size Range: 1¼”by ½” (40 mm by 20mm) through 24” by 4” (630 mm by 125 mm)
• Fittings are made to match the pressure rating of the thickest pipe
• Fittings are weldable to every available SDR in the given size
• Available with male and female threaded outlets and PEX adapters
• When parts are welded to SDR 17 Pipe in sizes 2” through 3½, system pressure rating is reduced
• Complete labeling is indicated on the packaging
• Some labeling is included on the part
• Keep fittings in original packaging prior to installation

CLICK HERE FOR A GENERAL SUBMITTAL FORM

Product Name

SDR

Product Code

Photo

Size Range

Download

INSTABRANCH WELDING SOCKLET W/SOCKET FUSION OUTLET

---

27NGS

½”x 1¼” - 4”x 24”

Submittal Form

Cut Sheet

INSTABRANCH WELDING SOCKLET W/NPT LEAD FREE BRASS FEMALE OUTLET

---

27NGSF_NPT

1 ¼ ”x ½” NPT - 24 ”x 1” NPT

Submittal Form

Cut Sheet

INSTABRANCH WELDING SOCKLET W/NPT STANDARD BRASS FEMALE OUTLET

---

27NGSF_NPTL

1¼”x ½” NPT - 24 ”x 1” NPT

Submittal Form

Cut Sheet

INSTABRANCH WELDING SOCKLET W/NPT STAINLESS STEEL FEMALE OUTLET

---

27NGSF_SSNPT

1¼” x ½” NPT - 24”x 1” NPT

Submittal Form

Cut Sheet

INSTABRANCH WELDING SOCKLET W/ HEXAGONAL NPT LEAD FREE BRASS FEMALE OUTLET

---

27NGSFC_NPTL

1¼” x ½” NPT - 24”x ½” NPT

Submittal Form

Cut Sheet

INSTABRANCH WELDING SOCKLET W/ HEXAGONAL NPT LEAD FREE BRASS FEMALE OUTLET

---

27NGSFC_NPT

1¼” x ½” NPT - 24”x ½” NPT

Submittal Form

Cut Sheet

INSTABRANCH WELDING SOCKLET W/HEXAGONAL NPT STAINLESS STEEL FEMALE OUTLET

---

27NGSFC_SSNPT

½” x 1¼ ” NPT - 24 ”x 2” NPT

Submittal Form

Cut Sheet

INSTAHEADER PEX ADAPTER (ASTM F 1960) FUSION WELDING SOCKLET

---

27NPGS

1¼”x ½” - 12”x 1”

Submittal Form

Cut Sheet

INSTAHEADER PEX ADAPTER (CRIMP RING - ASTM F 1807) FUSION WELDING SOCKLET

---

27NPGSCR

1¼”x ½” - 4”x 1”

Submittal Form

Cut Sheet

For a complete listing of products and sizes please refer to the product catalog. We reserve the right to vary dimensions without notice, as the design of fittings change from time to time.

Electrofusion Fittings

Injection Molded in sizes ½” through 10”; Couplings available ½” through 24”
Each fitting type can be welded to any of the various SDRs of pipe
Pressure Ratings of the part vary by size. The proper fitting should be selected to match the required pressure rating of the pipe SDR
Fittings and Couplings are all provided with a fusion bar code label
Fittings through 4” and all couplings have a unitary circuit. Tees have a unitary circuit on the main and a plain spigot on the branch (no wire)
Fittings 6” and above are made with individual circuits on each outlet.
Fitting and coupling connector pins are 4.0 mm size

CLICK HERE FOR A GENERAL SUBMITTAL FORM

Product Name

SDR

Product Code

Photo

Size Range

Download

ELECTROFUSION COUPLING

7.4

27NME_73

½ ”- 12”

Submittal Form

Cut Sheet

ELECTROFUSION COUPLING

27NME_11

3 ” - 20”

Submittal Form

Cut Sheet

ELECTROFUSION COUPLING

27NME_17

6”, 8", 22", 24”

Submittal Form

Cut Sheet

ELECTROFUSION 30° ELBOW

27NCEM30

3” - 8”

Submittal Form

Cut Sheet

ELECTROFUSION 45° ELBOW

7.4, 11

27NCEM

1” - 10”

Submittal Form

Cut Sheet

ELECTROFUSION 90° ELBOW

7.4, 11

27NGEM

½” - 10”

Submittal Form

Cut Sheet

ELECTROFUSION REDUCER

7.4, 11

27NRDE

1”x ¾” - 10”x 8”

Submittal Form

Cut Sheet

ELECTROFUSION TEE

7.4, 9, 11 & 17

27NTCE

½” - 10”

Submittal Form

Cut Sheet

ELECTROFUSION REDUCED TEE WITH SPIGOT END

27NTER11

3½” x 2 ” - 10”x 8”

Submittal Form

Cut Sheet

FLEX RESTRAINT MODULAR PIPE STOP

---

27NFT

10” - 24”

Submittal Form

Cut Sheet

For a complete listing of products and sizes please refer to the product catalog. We reserve the right to vary dimensions without notice, as the design of fittings change from time to time.

Electrolet Fittings

• Injection Molded in sizes 1¼” through ¾” (40 mm by 25 mm) through 24” by 8” (630mm by 200mm)
• Each fitting type can be welded to any of the various SDRs of pipe
• Pressure Ratings of the part vary by size, the proper fitting should be selected to match the required pressure rating of the pipe SDR
• Fittings are all provided with a fusion bar code label
• Available with male and female adapters, PEX adapters and valve outlets
• Fitting and coupling connector pins are 4.0 mm size

CLICK HERE FOR A GENERAL SUBMITTAL FORM

Product Name

SDR

Product Code

Photo

Size Range

Download

ELECTROLET BRANCH FITTING WITH RIGID UNDER CLAMP WITH RIGID UNDER CLAMP

27NCOL-RUC

1¼”x ½” - 4”x 2”

Submittal Form

Cut Sheet

ELECTROLET BRANCH FITTING WITH BELT

27NCOL-B

3”x 1¼” - 12”x 4”

Submittal Form

Cut Sheet

HIGH VOLUME ELECTROLET BRANCH FITTING WITH BELT

27NCOLTL

8”x 3” - 24”x 3” - 12”x 6” - 24”x 6” - 14”x 8” - 24”x 8”

Submittal Form

Cut Sheet

ELECTROLET BRANCH FITTING WITH PEX ADAPTER (COLD EXPANSION - ASTM F 1960)

27NCOLPR-RUC

1¼”x ½” - 4”x 1¼”

Submittal Form

Cut Sheet

ELECTROLET BRANCH FITTING WITH PEX ADAPTER (CRIMP RING - ASTM F 1807)

27NCOLPRCR-B

1¼”x ½” - 4”x 1”

Submittal Form

Cut Sheet

FEMALE THREADED ELECTROLET BRANCH FITTING WITH RIGID UNDER CLAMP

27NCOLF_F-RUC

1¼”x ½” - 4" X 1"

Submittal Form

Cut Sheet

MALE THREADED ELECTROLET BRANCH FITTING WITH RIGID UNDER CLAMP

27NCOLF_M-RUC

1¼”x ½” - 4" X 2"

Submittal Form

Cut Sheet

FEMALE THREADED ELECTROLET BRANCH FITTING WITH BELT

27NCOLF_F-B

3”x1¼” - 12”x 4”

Submittal Form

Cut Sheet

MALE THREADED ELECTROLET BRANCH FITTING WITH BELT

27NCOLF_M-B

3”x 1¼” - 12”x 4”

Submittal Form

Cut Sheet

ELECTROLET BRANCH FITTING WITH VALVE PEX ADAPTER (COLD EXPANSION - ASTM F 1960)

27NCOLVPR

1¼”x 1” - 12”x 1” outlet ½”, ¾”, 1”

Submittal Form

Cut Sheet

ELECTROLET BRANCH FITTING WITH VALVE PEX ADAPTER (CRIMP RING - ASTM F 1807)

27NCOLVPRCR

1¼”x 1” - 12”x 1” outlet ½”, ¾”, 1”

Submittal Form

Cut Sheet

ELECTROLET BRANCH FITTING WITH VALVE AND PP-RCT PIPE FOR DRILLING TOOL

27NCOLV

3½”x 2” - 12”x 3”

Submittal Form

Cut Sheet

For a complete listing of products and sizes please refer to the product catalog. We reserve the right to vary dimensions without notice, as the design of fittings change from time to time.

Compression Fittings

Available in ½” through 3½” size
Pressure rated to 150 psi through 140*F
Ideal for testing and for service which requires frequent disassembly & reassembly

Product Name

SDR

Product Code

Photo

Size Range

Download

COUPLING

---

03NKMAN

½” - 4”

Submittal Form

Cut Sheet

90° ELBOW

---

03NKG

½” - 4”

Submittal Form

Cut Sheet

REDUCER

---

03NKR

¾”x ½” - 4”x 3”

Submittal Form

Cut Sheet

TEE

---

03NKT

½” - 4”

Submittal Form

Cut Sheet

For a complete listing of products and sizes please refer to the product catalog. We reserve the right to vary dimensions without notice, as the design of fittings change from time to time.

Valves

True Union Ball Valves are available in ½” through 4” size range
Available with socket or spigot ends in β-PP-RCT
Available with HDPE end connectors, PVC solvent cement, PEX crimp, PEX Cold Expansion, brass female hreaded Instabranch and compression fitting end connectors are all available
EPDM seals and Teflon seats are standard, Viton seals and Teflon seats are optional
Standard ISO 5211 mounting pad for actuator assembly
Short and long (adjustable) Stem extensions available
Ball check (cone check valves available in ½” through 3” size
Brass bodied valves with spigot end s (1¼” through 2”) and valves with brass internal parts with socket ends (½” through 1”) are also available

Product Name

SDR

Product Code

Photo

Size Range

Download

PP-RCT TRUE UNION BALL VALVE SOCKET FUSION ENDS

27NRSPPRCT

½” - 4”

Submittal Form

Cut Sheet

PP-RCT TRUE UNION BALL VALVE SPIGOT ENDS

27NRSPPRCTS

¾” - 4”

Submittal Form

Cut Sheet

PP-RCT TRUE UNION BALL VALVE PVC SOLVENT CEMENT JOINT

27NRSPPRCT_PVC

½” - 3"

Submittal Form

Cut Sheet

PP-RCT TRUE UNION BALL VALVE PE SPIGOT ENDS

27NRSPPRCTS_PE

¾” - 3½”

Submittal Form

Cut Sheet

PP-RCT TRUE UNION CONE CHECK VALVE

---

27NBCV

½” ÷ 3”

Submittal Form

Cut Sheet

TIGHTENING WRENCH FOR BALL VALVES

---

00CHGH

1” - 2" - 3”

Submittal Form

Cut Sheet

PE WELDING COLLAR SPIGOT ENDS

---

27NAPES

¾" - 4"

Submittal Form

Cut Sheet

PP-RCT WELDING COLLAR SPIGOT ENDS

---

27NAPPS

¾" - 4"

Submittal Form

Cut Sheet

PP-RCT WELDING COLLAR SOCKET FUSION END

---

27NAPP

½" - 3"

Submittal Form

Cut Sheet

PP-RCT / BRASS FEMALE ADAPTER NPT THREADED

---

27NAPPF_NPT

½" - 1"

Submittal Form

Cut Sheet

WELDING COLLAR PVC SOLVENT CEMENT JOINT

---

27NAPVC

½" - 4"

Submittal Form

Cut Sheet

WELDING COLLAR PVC SOLVENT CEMENT JOINT WITH NPT THREAD

---

27NAPVCF_NPT

½" - 3"

Submittal Form

Cut Sheet

For a complete listing of products and sizes please refer to the product catalog. We reserve the right to vary dimensions without notice, as the design of fittings change from time to time.